HyperX Pulsefire Haste 2 Mini: Two-minute review
The name of the HyperX Pulsefire Haste 2 Mini appears to be a slapdash assortment of buzzwords, but it at least signals its intentions of being a rapid gaming mouse. HyperX claims it’s 16% smaller than the Pulsefire Haste 2, as well as being a few grams lighter (59g rather than 61g).
As with other HyperX peripherals, the HyperX Pulsefire Haste 2 Mini keeps to a minimal aesthetic, with only two small logos present. There is also an RGB light around the rim of the scroll wheel, but again, this is reasonably understated compared to other gaming peripherals. The chassis has a more textured feel than you might expect from a gaming mouse, which should help players maintain their grip when things get sweaty.
This isn’t the lightest mini gaming mouse out there, with numerous other examples managing to keep the grams down to the low 50s. What’s more, the weight doesn’t feel evenly distributed, with most of it appearing to be concentrated around the center, making the Pulsefire Haste 2 Mini feel heavier than it is.
Immediately apparent when you first grip the mouse is the steep rake of the two main buttons. I found this comfortable as it was conducive to the natural bend in my fingers and knuckles – something I can’t say about other compact gaming mice I’ve experienced. Their deep indentations also help to keep your fingers in place, while the concave sides help secure your overall grip on the Pulsefire Haste 2 Mini.
Clicks are more weighted than you might expect compared to some of the best gaming mouse options in this size category, which means rapid firing isn’t as easy to pull off as you might expect, quite ironic given its name. That sloping angle does help to facilitate spamming somewhat, letting you hammer down on the buttons more emphatically, but they’re still not as snappy as I would’ve liked.
The back and forward buttons are quite large for a miniature mouse. They feel firm but are easy to actuate and pleasingly responsive. The scroll wheel is well-notched, and the scroll button offers a secure push for the most part, although I did struggle to actuate it consistently: if you don’t hit the wheel square in the middle, then you’ll encounter a surprising amount of resistance, which can lead to failures in registering your inputs.
Despite only having four small PTFE skates in each corner and one around the optical sensor, they’re quite thick, which makes the Pulsefire Haste 2 Mini glide smoothly, even over hard surfaces. It’s one of the mouse’s standout features, one that will be sure to please the accuracy-craving FPS sect.
The DPI button is located on the top and can be used to cycle through up to five predefined settings. It can also be customized to perform other functions. I should mention I did experience a strange bug on one of the Windows 10 machines I tested the Pulsefire Haste 2 Mini with, where the DPI kept reverting to 800 when left idle for a couple of minutes. This could’ve merely been a quirk of my particular system, and on my main gaming rig – which also uses Windows 10 – I didn’t have this issue.
What might deter some gamers is the maximum polling rate of 1,000Hz, who might not deem this high enough for esports-grade performance. Those who use the Pulsefire Haste 2 Mini for casual gaming will most likely not even notice the difference, but the higher polling rate should reduce that all-important latency figure, making movements smoother and therefore more accurate.
Ngenuity is HyperX’s software for customizing the Pulsefire Haste 2 Mini, but it is quite limited in what it can do. There are options to change the polling rate, lift-off distance (a binary choice between 1mm and 2mm), and RGB lighting, but there is a distinct lack of system-level and media shortcuts available for binding. Admittedly, this is probably less of a concern for mice than it is for keyboards, but worth mentioning nonetheless. If top-level customization is what you’re after, then Razer provides its peripherals with many more options via its Synapse suite.
Battery life is a claimed 100 hours, and during my testing, this does appear to hold true. After using the mouse for around three weeks, I didn’t need to recharge it once.
As well as a wireless 2.4GHz dongle, the Pulsefire Haste 2 Mini also has the ability to connect via Bluetooth, handy if you want to switch between two devices quickly by using the selector switch underneath. The connection works well, although be warned that if you do connect via Bluetooth, you won’t be able to use it with the Ngenuity software, so your customization options are limited. You can still cycle through your DPI settings with the DPI button, though.
The Pulsefire Haste 2 Mini can also be used in wired mode while charging. The included USB-C to USB-A cable is very light and malleable, which means there is next to no drag to disrupt the experience.
As a gaming tool, the HyperX Pulsefire Haste 2 Mini is a solid choice, but it ultimately won’t blow you away. It glides excellently and has good ergonomics to offer a secure grip and operation. But the lack of an 8K polling rate will likely irk some potential users, and the clicks are a little too on the heavy side when ultra-quick spamming is called for. This is fast becoming a saturated market, and the fact is there are plenty of high-polling lightweight mice out there from the likes of Razer and other big hitters.
HyperX Pulsefire Haste 2 Mini: Price & availability
- $79 / £89 / about AU$119
- Available in black or white
- Cheaper than the competition
The Pulsefire Haste 2 Mini is available now for $79 / £89 (about AU$119) and comes in two colorways: black or white. It’s marginally cheaper than its bigger sibling, the Pulsefire Haste 2, which comes in at $89 / £94 / AU$149.
Confusingly, there’s also the Pulsefire Haste 2 Core, which is even less at $49 / £49 / about AU$73. It looks nearly identical to the standard edition, but there are various differences, including a heavier weight (70g), no inbuilt battery (it uses a single AAA instead), and a lower maximum DPI rate of 12,000.
The Pulsefire Haste 2 Mini has a lower price tag than many of its rivals in the lightweight wireless gaming mice market. There are others in this segment that are over £100, but then there’s the Cooler Master MM311, a bargain pick that undercuts many competitors at $39.99 (about £30 / AU$59) while still offering a very competent package. It is heavier at 77g, though.
The Razer DeathAdder V3 Hyperspeed, a similarly lightweight wireless gaming mouse tipping the scales at 55g, is slightly more expensive at $99.99 / £99.99 / AU$179.95, and it’s full-size. However, it can be upgraded to an 8KHz polling rate with the additional Razer HyperPolling wireless dongle, which costs an extra $29.99 / £29.99 / AU$54.95.
If lightness is a priority for you, then the Pulsar X2v2 commands a similar price but weighs less at 52-54g, and it’s also wireless. There’s also the Razer Viper V3 Pro, which is a full-size mouse but still lighter at 54g, although it is considerably more expensive than the Pulsefire Haste 2 Mini. It does have a maximum polling rate of 8KHz, though – an important feature for those who prize smoothness above all else.
HyperX Pulsefire Haste 2 Mini: Specs
Should you buy the HyperX Pulsefire Haste 2 Mini?
Buy it if...
Don't buy it if...
HyperX Pulsefire Haste 2 Mini: Also consider
How I tested the HyperX Pulsefire Haste 2 Mini
- Tested for 3 weeks
- Played a variety of games
- 10+ years of PC gaming experience
I used the Pulsefire Haste 2 Mini for around 3 weeks. During that time, I used it for gaming, casual PC use, and productivity.
I played various FPS titles, including the ever-popular Counter-Strike 2 and the open-world Generation Zero. I also played sedate exploration games, including Botany Manor and Dimhaven, both of which are pretty much the antithesis of competitive shooters.
I used it in both the 2.4GHz wireless and Bluetooth modes, as well as wired. I used it on a variety of machines, including desktop and laptop PCs.
First reviewed: July 2024
