Get all your news in one place.
100’s of premium titles.
One app.
Start reading
Autosport
Autosport
Sport

How Red Bull has taken another leap with F1’s rear wing trend

The semi-detached rear wing tip solution is one example of this right now – as rivals clearly saw the potential on offer when Aston Martin and Alpine simultaneously debuted original versions of the two slightly different solutions in Monaco last year.

All teams have been in search of means to recover some of the losses that the regulations imposed on them at the rear, as the endplate and flap juncture are very different when compared with how they were shaped in the past.

This was for good reason though, as teams had become extremely adept at managing the tip vortex to increase downforce and reduce drag. While good for car performance, this was troublesome for a trailing car as it had an impact on the overall wake profile.

Designers cannot unlearn what they already know though and they quickly realised that if they could unravel some of the limitations that the regulations seemed to impose on then, while introducing some of their old ideas in a new way, they could recoup some lost performance.

Just over a year on from the arrival of these two solutions, there’s still a healthy dose of development being carried out on the now quite divergent development branches that have emerged.

Alpine A523 rear wing side comparison (Photo by: Giorgio Piola)

The main route that’s been taken by most of the teams has the Alpine design at its core, with a metal bracket angled in opposition to the endplate and inboard of the juncture.

However, as the teams have iterated their designs, there’s been a move towards an elongated lower tip, which is drawn down over the bracket and mainplane’s edge. There has also been a reshaping of the tip section to provide assistance to the upper flap.

These optimisations, along with a remodelling of the endplate cutout, are all designed to help with the trade-off between creating more downforce and reducing drag, while being mindful of how powerful DRS is when deployed.

Sauber mono pillar, Monaco vs Canada (Photo by: Giorgio Piola)

Sauber introduced new rear wings into its pool at both Monaco and Canada, as the team made the switch from a double mounting pillar arrangement to a single element.

Interestingly, the Swiss-based outfit hedged its bets, as the solutions, which are on either end of the downforce spectrum, have two different semi-detached tip sections. The higher downforce variant follows in the footsteps of the Aston Martin design, while the lower downforce offering follows the Alpine lineage.

Meanwhile, Mercedes is another interesting case study, as it pursued the Aston Martin direction during 2023 but made the switch to the Alpine concept for 2024 (inset, below).

Mercedes W15 rear wing Imola comparison (Photo by: Giorgio Piola)

The German manufacturer introduced an all-new variant into the mix at Imola, as it developed a forward reaching, outboard-mounted solution.

The overarching goal of the design is clear, as it looks to trade drag for the given downforce level of the wing in use. However, it is a more creative interpretation, which is only natural given the time with which the designers have now had with these regulations and this particular design feature.

Red Bull also made changes to the RB20’s rear wing design in Canada, as it continues to hunt for ways to improve efficiency, which is especially important given that the chasing pack are now hot on its heels.

Red Bull RB20 rear wing tip (Photo by: Uncredited)

Its latest design was quite interesting though, as it added a small vane on the top corner of the mainplane and endplate juncture that was also angled parallel to the tip section’s mounting bracket.

The new vane also sits inline with the lower tip of the tip section (see inset), which was also modified as part of the overhaul and will take advantage of the vane. These both alter the behaviour of the airflow in that region.

Keen to ensure that the wing was performing as its simulation tools had predicted, Red Bull doused the RB20’s rear wing elements in flow-vis paint during Free Practice 1, with the streamlines created in the oil-based paint providing a snapshot into the airflow’s behaviour over those surfaces.

Red Bull Racing RB20 rear detail (Photo by: Giorgio Piola)

It’ll be interesting to see if, how and when the other teams begin to apply a similar logic to their own semi-detached tip section solutions, given every single team on the grid has either had or is currently running one.

Watch: Canadian GP Race Review - Wet and Wild Vs Cool and Calm

Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
One subscription that gives you access to news from hundreds of sites
Already a member? Sign in here
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.