In a world where everything is getting more and more expensive, being able to decorate yourself can save you some serious pennies. And if you’re looking to give your walls some TLC, knowing how to remove wallpaper yourself can be a handy skill to have.
Although there are so many amazing wallpaper ideas out there, it’s nice to be able to mix things up every now and then - especially as wallpaper trends chop and change all the time. And while you could wallpaper over wallpaper if you really don’t want to stretch your DIY fingers, experts don’t recommend this.
As Sarah McCann, print and product expert at Voyage Maison, explains, ‘If you're considering giving your home a wallpaper update, the first step you must tackle is to remove the existing wallpaper. While it may be tempting to apply the new wallpaper directly on top, it's important to take off the current layers first. This will help prevent frustrating creases and air bubbles from forming during the application process.’
What you'll need
It's always good to stock up on a few scrapers if you want to remove wallpaper. Different sizes will also help you go into the nooks and crannies of your room, too.
Using a wallpaper stripper is generally considered the best and most efficient way to remove wallpaper. This one comes with 70 minutes continuous use time, so it'll tackle rooms of all sizes.
A good-quality sponge will aid every stage of the wallpaper removal process, so it's best to stock up if you don't have any at home.
Step-by-step
1. Prepare the area
Just as you need to prepare yourself and your home for painting a room, you also need to do the same when removing wallpaper. After all, it can be a messy (and dangerous) business if you don’t take precautions.
For starters, you need to prepare the area. Adam Clark at My Local Toolbox suggests, ‘Protect all floors and furniture with either drop cloths or old sheets. Painter tape is a great way to protect electrical outlets, skirting boards, and/or panelling.’
To go one step further, Tim Warren, a DIY expert from Adkwik, advises, ‘Turn off the electricity in the room where you will be working, as water or steam may come into contact with plug sockets or switches.’
To make things as easy as possible and to ensure you won’t have to get mould out of fabric later down the line, you should also aim to move furniture out of the room - especially if you plan on using a steamer to remove wallpaper.
If using chemical wallpaper remover, you should wear gloves and eye protection to avoid any injury or irritation. And if you’re on the shorter side, you might want to keep a ladder (and someone to hold the ladder) close by.
2. Perforate the wallpaper
After preparing yourself and the area, you may feel inclined to get cracking as soon as possible. But there’s another step to take before you can really start stripping wallpaper - especially if you want to protect your walls and make the process as easy as possible.
Adam explains, ‘Using the correct tool, puncture small holes in the wallpaper.’ So, you can use a scoring tool like this GoodHome Wallpaper Scoring Tool from B&Q for this step.
You must be careful here, though, as you could damage your wall. ‘Only use enough pressure to enable the teeth of the scorer to cut into the surface of the wallpaper. You should not use a knife or scissors to score wallpaper, as it will be difficult to score evenly, and you risk damaging the wall underneath,’ advises Tim.
3. If you want, use a removal solution
If you have a fair amount of time on your hands and want something that will work efficiently every time, buying or making a removal solution may be your best bet.
Chemical wallpaper strippers like this Solvite Ready to Use Wallpaper Stripper from Amazon are faff-free and ready to be sprayed liberally onto your walls. However, you should always follow the manufacturer’s instructions for the best results. You also need to give it time to work its magic, and most experts suggest leaving it at least 20 minutes after spraying.
Tim then advises, ‘Using a stripping knife, make short, sharp movements to remove the paper from the wall once it is loose enough, ensuring that you are not damaging the wall as you go. Try to keep the knife as flat as possible, and do not let the edge dig into the surface. If any areas of the wall begin to dry out before you reach them, apply more of the chemical stripper to the wall according to the instructions.’
You don’t have to use a chemical stripper if you prefer to stick to natural products in your household. If you clean with vinegar, you can also use it to remove wallpaper.
Adam suggests, ‘When using vinegar, mix with equal parts water and then spray the mixture liberally onto the wallpaper. Although you cannot scrimp on the mixture, focusing on small areas at a time is best, and then allow to soak for 10-15 minutes.’
You should then be able to use the scraper to remove the wallpaper from the wall easily. But as with the chemical stripper, you may need to reapply your solution every so often.
4. Alternatively, start steaming
Alternatively, you could use a wallpaper steamer to remove wallpaper from your wall. This is a much quicker method, and while you do have the added cost of buying (or renting) the steamer itself, owning one can come in handy if you plan on using it time and time again.
Using steam to remove wallpaper is also extremely easy. Tim says, ‘Hold the steam plate at the bottom of a strip of wallpaper for roughly ten seconds so that the paper is damp. The steam should have penetrated enough to loosen the adhesive used on the wallpaper, but you may need to leave the steam plate against the wall for a little longer.’
He adds, ‘However, do not hold the steam plate against the wall for longer than a few seconds at a time to avoid damaging the plaster. If you begin to hear a popping noise, this suggests that the plaster is cracking and damaging the wall.’
For ease, it’s a good idea to work from the bottom to the top, as the steam will rise and ultimately make removing the top sections easier. However, you should always open the windows and keep doors open when using a steamer, as you don’t want to create any damp or condensation problems in your home.
5. Clean the walls
Once you’ve done the above, you can focus on cleaning your wallpaper-free walls.
Adam suggests a simple solution of warm, soapy water to do this. And you can apply this using a sponge or cloth. However, if you have any leftover sugar soap - like this Rustins Sugar Soap from Dunelm - in your garage, you could also use this to clean your walls after removing the wallpaper.
This concoction should break down any adhesive residue on your walls and leave you with a squeaky-clean finish. Then, you should leave your walls to fully dry before doing anything else to them.
FAQs
Does washing up liquid remove wallpaper?
Yes, it does! If you don’t want to use a chemical stripper or steamer or make a solution from vinegar, you can make your own washing-up liquid wallpaper remover.
Sarah McCann from Voyage Maison explains, ‘Start by filling a bucket with hot water and adding a few drops of dishwashing liquid. Using a sponge, apply the soapy water directly to the wallpaper and let it soak for twenty minutes before trying to peel the wallpaper away.’
She adds, ‘This method is effective and has minimal odour, but keep in mind that you may need to repeat the process a few times to completely remove the wallpaper, as it is a gentler approach.’
So, if you’re short on time and want to remove wallpaper as soon as possible, washing-up liquid might not be the option for you.
What not to do when removing wallpaper
There are many things you shouldn’t do when removing wallpaper. These include:
- Scoring the wallpaper too deeply before removing.
- Leaving the solution on for too long.
- Steaming for too long.
- Not removing all of the paper.
- Not removing the adhesive residue.
So, now you know how to remove wallpaper you should be able to tick this off your to-do list in no time!
