Lampshades have been turned into indoor air purifiers by applying a “clever” new coating.
Scientists have successfully designed catalyst-coated lampshades that transform indoor air pollutants into harmless compounds.
The lampshades work with both halogen and incandescent light bulbs, and the research team is extending the technology so it will also be compatible with LEDs.
Project principal investigator Doctor Hyoung-il Kim says the lampshades target volatile organic compounds (VOCs), which account for most indoor airborne pollutants.
The compounds include acetaldehyde and formaldehyde and are released by paints, cleaners, air fresheners, plastics, furniture, cooking and other sources.
Dr. Kim, of Yonsei University, South Korea, said: “Although the concentration of VOCs in a home or office is low, people spend more than 90 percent of their time indoors, so the exposure adds up over time.”
Minhyung Lee, a graduate student in Dr. Kim’s lab, said: “Conventional methods to remove VOCs from indoor air rely on activated carbon or other types of filters, which have to be replaced periodically.”
Other devices have been developed that break down VOCs with the help of thermocatalysts activated by high temperatures or with photocatalysts, which respond to light.
But Dr. Kim noted that most of those units need a separate heater or an ultraviolet (UV) light source, which can produce unwanted byproducts.
His team wanted to take a simpler approach that would only require a visible light source that also produces heat – such as a halogen or incandescent bulb – and a lampshade coated with a thermocatalyst.
Dr. Kim says halogen bulbs convert only 10 percent of the power they use into light, with the other 90 percent being transformed into heat while incandescent bulbs emit five percent light and 95 percent heat.
He said: “That heat is typically wasted, but we decided to use it to activate a thermocatalyst to decompose VOCs.”
Dr. Kim’s team synthesized thermocatalysts made of titanium dioxide and a small amount of platinum.
They coated the inside of an aluminum lampshade with the catalyst and placed the shade over a 100-watt halogen bulb in a test chamber containing air and acetaldehyde gas.
Turning the lamp on heated the shade to temperatures up to about 250 degrees Fahrenheit (121 Celcius) – warm enough to activate the catalysts and decompose acetaldehyde.
Dr. Kim said that during the oxidation process, the VOC was initially converted into acetic acid, then into formic acid, and finally into carbon dioxide and water.
He says both of the acids are mild, and the amount of carbon dioxide released is harmless.
The researchers also discovered that formaldehyde can be decomposed under the same conditions and that the technique works with incandescent bulbs.
Dr. Kim said: “This was the first demonstration to utilize waste heat from lamp sources.”
He says most previous research projects, and even a couple of lamps on the market, have instead relied on light-activated photocatalysts to destroy indoor air pollution.
Dr. Kim’s group is now turning to less expensive substitutes for platinum. Thy have already shown that the new iron- or copper-based catalysts can break down VOCs.
Dr. Kim said copper is a disinfectant, so the copper catalyst may kill airborne microorganisms.
LEDs release too little heat to activate thermocatalysts, so Dr. Kim’s team is developing photocatalysts that are stimulated by the near-UV light emitted by LEDs, as well as other catalysts that transform part of the LEDs’ visible light output into heat.
He added: “Our ultimate goal is to develop a hybrid catalyst that can utilize the full spectrum produced by light sources, including UV and visible light, as well as waste heat.”
The findings are due to be presented at the latest meeting of the American Chemical Society (ACS) in San Francisco.
Produced in association with SWNS Talker
