Get all your news in one place.
100’s of premium titles.
One app.
Start reading
Kiplinger
Kiplinger
Business
Daniel Bortz

How to Prevent Pipes From Freezing This Winter

A father tries to catch water leaking from the ceiling with a bucket as his family looks on.

It's every homeowner's nightmare; you fail to prevent pipes from freezing in your home and a pipe bursts, flooding your house. Unfortunately, cold weather — particularly subzero temperatures — can take a toll on your home. Happily, there are many affordable ways to prepare your home for winter and prevent frozen pipes.

Prevent pipes from freezing to save money

Cleaning up water damage from a burst pipe can cost tens of thousands of dollars, according to CostHelper data. Sadly, it’s an all-too-frequent occurrence: Every year, roughly one in 60 insured homes has a property damage claim caused by water damage or freezing, according to the Insurance Information Institute

The good news is that a standard home insurance policy often covers damage from a burst pipe. But why deal with the headache of cleaning and the hassle of filing an insurance claim when a few precautionary measures can help prevent your home’s pipes from freezing in the first place? 

How to Prevent Pipes from Freezing  

When water freezes it expands, building pressure on the inside of the pipe. Eventually, that pressure reaches a breaking point and causes the pipe to rupture. 

Here’s how to help prevent that from occurring.

Drain outdoor faucets. Disconnect hoses and allow all the water to drain out of the outdoor faucets. Then, turn off your home’s outdoor water supply valve, which is typically located in the basement or garage. 

Keep garage doors closed. This is especially important if there are water supply lines in your garage.

Prop open kitchen and bathroom cabinet doors. This will allow warmer air to circulate around uninsulated pipes under sinks.

Keep the thermostat set to the same temperature during the day and night. If you're wondering whether you should leave your heat on all day or turn it off to save money, consider your local climate and the weather forecast. In general, leaving your heat on even when you are away from home or asleep is cheaper than turning it off completely. To avoid a burst pipe, you might even want to nudge the temperature up to your daytime setting during the night, given that sudden drops in temperature can lead to frozen pipes.

Set the thermostat no lower than 55° F when you go away. For good measure, also shut off your house’s main water valve before you leave. 

Add insulation to attics, basements, and crawl spaces. Insulation isn’t cheap — it typically costs $0.30 to $6.75 per square foot, depending on the material. But remember that there are substantial tax credits available for energy-efficient home improvements, including up to $1,600 for insulation, air sealing, and ventilation. Insulating your home can be a worthwhile investment since it will help maintain higher temperatures in these vulnerable areas. 

Insulate pipes. Wrapping pipes with heat tape is relatively inexpensive but can go a long way toward protecting them from the cold weather. Make sure to use heat tape that’s approved by UL Solutions, a global product safety and certification organization.

Seal air leaks. Inspect your home for cracks and openings, and seal them with caulk to prevent cold air from infiltrating your home.

How to thaw a frozen pipe

If you turn on a faucet and only a trickle of water comes out, a frozen pipe could be the culprit. Other warning signs to watch out for: whistling or banging coming from pipes; bubbling sounds when you flush a toilet; dampness on drywall or ceilings; or a foul odor from a drain or faucet. 

Here’s how to thaw a frozen pipe before it bursts. 

Turn on the faucet. Running water through the pipe will help melt the ice.

Apply heat gently. Use an electric hair dryer, an electric heating pad, towels soaked in hot water, or a portable space heater. Never use a blowtorch or other open flame device. 

Don’t stop applying heat until the full water pressure is restored. Once restored, leave the faucet running for a few minutes to give the ice time to completely clear from the line. 

What to do if a pipe bursts

You’ll need to act quickly to mitigate the damage. 

Shut off the water supply. The fastest way to do this is to turn off your home’s main water valve.

Check all other faucets in your home. If one pipe freezes, others may freeze, too.

Call a licensed plumber. You can use an online directory such as Angi, Thumbtack, or the Better Business Bureau to find one in your area.

Notify your insurance provider. File a claim right away to expedite the process.  

Read More

Sign up to read this article
Read news from 100’s of titles, curated specifically for you.
Already a member? Sign in here
Related Stories
Top stories on inkl right now
One subscription that gives you access to news from hundreds of sites
Already a member? Sign in here
Our Picks
Fourteen days free
Download the app
One app. One membership.
100+ trusted global sources.